Access Panel - Plastic Hinged (Midi+) 300 x 300mm
- Home »
- ACCESS PANELS »
- Plastic Access Panels »
- Hinged Panels »
- Access Panel - Plastic Hinged... / Midi+ 300 X 300mm
Other views - click on image to change view
PRODUCT CODE: SEL7175
Plastic Hinged Access Panel with door panel which is both hinged and removable for unobstructed access. Hinged Plastic Access Panels can be installed in minutes and have 100s of uses. read more...
Plastic Hinged Access Panel with door panel which is both hinged and removable for unobstructed access.
Suitable for Part J Building Regs, which specifies the provision of access hatches to allow visual inspection of concealed flue & chimney systems.
Part J Building Regulations state that access should be at least 300 x 300mm and should not adversely affect existing fire, thermal and acoustic provisions. (See the attached PDF by NHBC above or visit the link below direct to the 2010 Part J Regs document.)
If you are unsure of the best panel for your specific job, we advise you contact your Local Planning Authority or Gas Safe. We also supply Fire Rated Access Panels.
If working to Part J Regs also check out our range of audible Carbon Monoxide detectors for dwellings with fixed combustion appliances.
Access Hatches - Fit In Minutes. Multiple uses. Applicable for all Trades.
Our professional plastic access hatches with hinged doors have a white, lightly textured finish to allow for painting or wall papering on top.
Plastic inspection hatches provide the perfect solution for repairing damage to walls and ceilings and for creating access to:
- Concealed Flues, Ducts & Chimney Systems
- Plumbing & Central Heating Manifolds
- Valves, Soil, Waste & Sanitary fittings
- Security devices, hidden services & wiring
- Electrical & telecommunication controls
Made from 1/8" high impact, professional quality, heavy duty styrene plastic.
Dimensions:
-
Wall Opening: 300 x 300mm Midi+
-
Door Size: 290 x 290mm (approx 12" x 12")
- Outer Frame: 345 x 345mm
- Single
To fit a plastic inspection hatch, simply cut the appropriate size hole with a jab saw, apply a caulking adhesive to the back of the frame and press it into place.
Ask a Question
If you have a question regarding this product, click here to let us know.
