- Home »
- Access Panels | Loft Hatches »
- Plastic Access Panels »
- Access Panels 213 x 213 Plastic Reversible 10 Pack / Pack of 10
Access Panels 213 x 213 Plastic Reversible 10 Pack
Pack of Ten 213 x 213mm Reversible Plastic Access Panels
Professional, heavy duty, plastic, reversible Access Panel. Non-corrosive ABS material, UV stabilised for indoor and outdoor use.
With 100s of uses, our plastic reversible access panels can be fitted in minutes. You can hide anything behind them!
Unlike others available, our Access Panels are unique as they are reversible (fit surface or flush) and have no hinges that could break.
Access Panels are perfect for repairing damage to walls and ceilings or creating access to:
- Plumbing & Central Heating Manifolds
- Ducts, Valves, Soil, Waste & Sanitary fittings
- Security devices, hidden services & wiring
- Electrical & telecommunication controls
Made from non-corrosive ABS material, UV stabilised for indoor or outdoor use these easy to use, reversible Access Panels have a textured surface which can be decorated or tiled over and come in 5 sizes.
- Wall Opening = 213 x 213mm (8 3/8"x 8 3/8")
- Frame Size = 260 x 260mm
- Actual Door = 205 x 205mm
- Pack of 10
(Fire retardant Metal Access Panels are also available.)
For more information about our range of access panel visit our access panels information section.
Mark around the desired position using the appropriately sized access panel frame as a template, checking for plumb or level. Cut hole slightly larger. Slide the access panel frame through the prepared hole, checking for correct size and finish thickness (packing or the use of an expanding foam sealant may be required for thin plasterboard). Apply construction grade adhesive or expanding foam to the backside of the access panel frame in a continuous bead. Slide access panel’s frame through hole, press from the backside so that the lip of the frame is flush with the desired wall surface. Snap access door into place when adhesive or foam is set.
Mark around the inside flange of the access panel for the opening. Cut a hole in the wall or plaster board slightly larger than the access panel and check for plumb and level. Apply a thin bead of construction grade adhesive to the inside flange and hold the Access Panel frame into position until set. Snap in the door when set. Remove the access door by simply prising it open with a screwdriver head in the slotted positions.
Finish: Powder coated RAL 9010 20% gloss as standard.
Guaranteed for 12 months.
If you have technical questions regarding this product please fill in this Enquiry form.
This product currently has no reviews.
Please login to leave a review