Plastic Air tight Access Panel - 300 x 300mm - Trade Counter Direct Ltd

Other views - click on image to change view

Plastic Air tight Access Panel - 300 x 300mm

Product Code: SEL7108AT

  • £19.99
    (£16.66 exVAT)

Select Variation:

  • Description
  • Reviews
  • Seen It Cheaper?
Find a lower price? Price Match - We'll match it!

Plastic Airtight Access Panel - 300 x 300mm.

TCDs professional, heavy duty, plastic, Access Panels. The panel to use for a high quality finish, surface or flush allowing access in walls or ceilings. The flush finish can be plastered right upto for a very smooth, hidden finish.

This is a 1 of a kind Surface & Flush finished Air Tight Plastic access panel.

Constructed from rugged, non-corrosive ABS material and UV stabilised for indoor and outdoor use. Picture frame finish for surface fit in walls or ceilings. Their white, lightly textured finish allows you to decorate on top with paint or paper.

Create access to anything with TCDs professional range of reversable plastic access panels. Fit in minutes, simply cut a hole in the plasterboard and apply a caulking adhesive to the back of the frame and press it into place.

They provide the perfect solution for repairing damage to walls or for creating access to:

  • Plumbing & Central Heating Manifolds
  • Ducts, Valves, Soil, Waste & Sanitary fittings
  • Security devices, hidden services & wiring
  • Electrical & telecommunication controls

Made from 1/8" high impact, professional quality, heavy duty styrene plastic.


  • Wall Opening: 300 x 300mm (12"x 12")
  • Frame Size: 345 x 345mm
  • Actual Door: 290 x 290mm




Mark around the desired position using the appropriately sized access panel frame as a template, checking for plumb or level. Cut hole slightly larger. Slide the access panel frame through the prepared hole, checking for correct size and finish thickness (packing or the use of an expanding foam sealant may be required for thin plasterboard). Apply construction grade adhesive or expanding foam to the backside of the access panel frame in a continuous bead. Slide access panels frame through hole, press from the backside so that the lip of the frame is flush with the desired wall surface. Snap access door into place when adhesive or foam is set.


Mark around the inside flange of the access panel for the opening. Cut a hole in the wall or plaster board slightly larger than the access panel and check for plumb and level. Apply a thin bead of construction grade adhesive to the inside flange and hold the Access Panel frame into position until set. Snap in the door when set. Remove the access door by simply prising it open with a screwdriver head in the slotted positions.

Part J Reg

Suitable for Part J Building Regs, which specifies the provision of access hatches to allow visual inspection of concealed flue & chimney systems.

Technical Question?

Ask a question

If you have technical questions regarding this product please fill in this Enquiry form.

Select Variation:


Recently Viewed

Sign up to TDC Tool Shop News

Delivery Country Selected =
  • UK
  • European Destination
  • International Destination

Currency Conversion Selected =

Wheres My Country Click Here