Domestic Quiet Extraction Fan 100mm - SEL3510-100 / SEL3510-100T / SEL3510-100TH
Innovative exhaust fan with stylish design for new comfort level in shower rooms, bathrooms, kitchens and other residential premises.
Maximum air capacity combined with low noise level provide the ideal microclimate.
- Mounting into ventilation shafts or connection to Ø100
- Casing and impeller made of high-quality and durable UV-resistant plastic.
- Specially designed impeller aerodynamic profile provides high air capacity and low noise.
- The compact design enables wall and ceiling mounting.
- The shortened spigot for mounting into a ventilation shaft or connection to Ø 100
- The fan is equipped with a specially designed back valve to prevent back flow and heat losses during the fan standby.
- The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulence, increase air pressure and lower noise level.
Mode 1 (single-speed mode)
- The fan is turned off by default. The fan starts operating at the 1st speed when the switch is closed or one of the sensors is activated.
- Manual control with a room light switch. The switch is not included into delivery set.
Mounting features
- Installation directly inside a ventilation shaft.
- Flexible air ducts may be used in case of remote location of the ventilation shaft.
- Connection of the air duct to the exhaust flange with a clamp.
- Wall mounting with screws.
- Suitable for ceiling mounting.
Available in 3 different variations:
SEL3510-100 = Standard 100mm
SEL3510-100T = Timer 100mm
SEL3510-100TH = Timer & Humidity Sensor 100mm
Technical
| Voltage |
230
|
V
|
| Frequency |
50
|
Hz
|
|
Power consumption |
7.5
|
W
|
| Extract capacity |
97
57,133
26,966
0,02697
1619,9
|
m3/h
CFM
l/s
m³/s
l/m
|
| Current |
0.049
|
A
|
|
Noise level at 3 m |
25
|
dBA
|
|
Index of protection |
IP 45
|
class
|
| Dimention of connection pipe |
100
|
mm
|
