Plastic Access Panel - Reversible 300 X 300mm
Product Code: SEL7108
Plastic Access Panels - Reversible 300 X 300mm.
TCDs professional, heavy duty, plastic, Reversible Access Panels. The panel to use for a high quality finish, surface or flush in walls or ceilings.
Constructed from rugged, non-corrosive ABS material and UV stabilised for indoor and outdoor use. Suitable for wall and ceiling applications. With no hinges to break, reversible panels can be fit surface or flush. Their white, lightly textured finish allows you to decorate on top with paint or paper.Create access to anything with TCDs professional range of reversible Plastic Access Panels. For Surface and Flush fixing instructions see below.
Plastic inspection hatches provide the perfect solution for repairing damage to walls and ceilings and for creating access to:
- Plumbing & Central Heating Manifolds
- Ducts, Valves, Soil, Waste & Sanitary fittings
- Security devices, hidden services & wiring
- Electrical & telecommunication controls
- Wall Opening: 300 x 300mm (12"x 12")
- Frame Size: 345 x 345mm
- Actual Door: 290 x 290mm
- Qty: Single
Mark around the desired position using the appropriately sized access panel frame as a template, checking for plumb or level. Cut hole slightly larger. Slide the access panel frame through the prepared hole, checking for correct size and finish thickness (packing or the use of an expanding foam sealant may be required for thin plasterboard). Apply construction grade adhesive or expanding foam to the backside of the access panel frame in a continuous bead. Slide access panels frame through hole, press from the backside so that the lip of the frame is flush with the desired wall surface. Snap access door into place when adhesive or foam is set.
Mark around the inside flange of the access panel for the opening. Cut a hole in the wall or plaster board slightly larger than the access panel and check for plumb and level. Apply a thin bead of construction grade adhesive to the inside flange and hold the Access Panel frame into position until set. Snap in the door when set. Remove the access door by simply prising it open with a screwdriver head in the slotted positions.
Part J Reg
Suitable for Part J Building Regs, which specifies the provision of access hatches to allow visual inspection of concealed flue & chimney systems.
For the full Part J Building Regulations Document Click on the Part J icon.
If you have technical questions regarding this product please fill in this Enquiry form.
This product currently has no reviews.
Please login to leave a review