or
578X14 REMS Mini-Press 22V ACC now with 1 x 2.5Ah batteries until further notice (normally 1.5Ah*), L-Boxx, Rapid Charger & 4x Jaws/Tongs
Pressing tongs for all common systems
Complete assortment of REMS pressing tongs Mini/pressing rings for all common press fitting systems (page 144 – 166). Can be driven by all REMS radial presses 22 kN. Highly durable pressing tongs/pressing rings made of forged, tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond to the respective press-fitting system. Thus perfect system conformity, and safe press jointing. Adapter tongs are required for driving the REMS 45° (PR-2B) pressing rings, see page 166. Very compact design and low weight of the REMS Mini pressing tongs due to the special arrangement of the pressing tongs connection (Patent EP 1 952 948). Recesses in the pressing jaws for safe guidance of the connecting plate for offset-free pressing (Patent EP 2 347 862).
Design
Super light, super small, super handy. Drive unit with battery only 2.5 kg. Drive unit with pressing tongs V 15 only 31 cm long. Works anywhere, free-hand, overhead, also in particularly tight areas. Optimum weight distribution for single-hand operation. The Drive unit with inserted pressing tongs can be put down on the battery ready to pick up. Ergonomically designed housing with soft grip. LED work light for illuminating the workplace. Swivelling pressing tongs seat, rotation angle > 360 °. Secure seating of pressing tongs/adapter tongs by automatic locking.
Pressing operation with ACC
For reliable service, operating and functional safety. Automatic retraction after completion of pressing operation (automatic circuit control). Ultra-fast Pressing in under 4 s.
Drive
Enormous thrust and pressing force for fast and perfect press jointing. Thrust force 22 kN. Powerful electro-hydraulic drive with powerful battery motor 21.6 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.
Battery or mains operation
Li-Ion 22 V Technology. Highly resistant Li-Ion 21.6 V battery with 1.5, 2.5, 5.0 or 9.0 Ah capacity, for long service life. Light and powerful. Li-Ion 21.6 V, 1.5 Ah batteries for approx. 250 pressings, 2.5 Ah for approx. 390 pressings, 5.0 Ah for approx. 780 pressings, 9.0 Ah for approx. 1400 pressings Viega Profipress DN 15 with one battery charge. Graduated charging state display with coloured LED. Operating temperature range – 10 to + 60 °C. No memory effect for maximum battery power. Rapid charger Li-Ion 100 – 240 V, 90 W. Rapid charger Li-Ion 100 – 240 V, 290 W, for shorter charging times, as an accessory. 220 – 240 V/21.6 V, 15 A, voltage supply for mains operation instead of Li-Ion battery 21.6 V, as an accessory.
Kit Includes
It is possible to extend the manufacturer’s warranty for selected REMS products to 5 years by registering the drive machine within 30 days after delivery to the first user. Claims from the extended manufacturer’s warranty can only be filed when the rating plate of the drive machine has not been removed or changed and when legible. An assignment of claims is excluded.
The warranty period shall be 12 months from the delivery of the new product to the first user. The date of delivery shall be documented by the submission of the original purchase documents, which must include the date of purchase and the designation of the product. All functional defects occurring within the warranty period, which are clearly the consequence of defects in production or materials, will be remedied free of charge. The remedy of defects shall not extend or renew the warranty period for the product. Damage attributable to natural wear and tear, incorrect treatment or misuse, failure to observe the operational instructions, unsuitable operating materials, excessive demand, use for unauthorized purposes, interventions by the customer or a third party or other reasons, for which REMS is not responsible, shall be excluded from the warranty.
Services under the warranty may only be provided by customer service stations authorized for this purpose by REMS. Complaints will only be accepted if the product is returned to a customer service station authorized by REMS without prior interference and in a fully assembled condition. Replaced products and parts shall become the property of REMS.
The user shall be responsible for the cost of shipping and returning the product.
A list of the REMS-authorized customer service stations is available on the Internet under www.rems.de. For countries that are not listed, the product must be sent to the SERVICE-CENTER, Neue Rommelshauser Strasse 4, 71332 Waiblingen, Deutschland. The legal rights of the user, in particular, the right to make claims against the seller in case of defects as well as claims due to wilful violation of obligations and claims under the product liability law are not restricted by this warranty.
This warranty is subject to German law with the exclusion of the conflict of laws rules of German International Private Law as well as with the exclusion of the United Nations Convention on Contracts for the International Sales of Goods (CISG). Warrantor of this world-wide valid manufacturer’s warranty is REMS GmbH & Co KG, Stuttgarter Str. 83, 71332 Waiblingen, Deutschland.
Shopped online before? Try signing in with the email and password you registered with.
If you still can’t sign in, please reset your password Click here
Not shopped online with us before? You’ll need to register your email address and set up an account, even if you’ve shopped in branch or over the phone.
I’ve forgotten my password
If you have forgotten your password, please reset your password here, and enter the email address you registered with, you will then receive an email with a link for a new password.
How can I view my orders or get a copy of my invoice?
Go to My Account and select My Orders in the right-hand menu. All of your online orders will appear here as soon as you complete the online checkout.
To print your online order invoice, click View Order once opened click print order at the top right of the page.
Seen this item cheaper elsewhere? Complete this form and send us the link to competitors product page. We will then contact you with a better or matched price where possible.
If you have technical questions regarding this product please fill in this Enquiry form
